Distributors are free to set their prices.
Engine lathe
Digital display (alimentation 230 V monophasé) :
Longitudinal stroke: 850 mm, transversal stroke: 205 mm, top stroke: 95 mm
Programming 200 additional zero points and 200 tools
Measuring tapers
Grey cast iron, induction-hardened and ground reinforced prismatic bench
CAMLOCK D1-4-type spindle
Hardened and ground bath-lubricated spindle, fitted on 2 high-precision taper roller bearings
Turning accuracy < 0.015 mm on the chuck
Hardened and groung gearbox gears, lubricated in an oil bath
No-play guideways, adjustment through gibs
8-gear mechanical gearbox
Rapid gear change through mechanical gearbox
Longitudinal and transversal automatic feeds
Simultaneous control of spindle and lead-screw
Side motion of mobile spindle +/- 10 mm
max. Ø maxi over carriage: 212 mm
max. Ø maxi under gap bench: 491 mm
Left/right inversion of rotational direction through an apron controlr
Impusle operating
Verniers with reset on all axes
Equipments:
Detachable gap bench, length 205 mm
Chip draw, anti-projection wall, fitted stand
Servo chuck protective shield
Coolant system, foot-pedal control, lighting 24V
Lead-screw protection, turning bar
Levelling and anti-vibration 6 feet
Tool box, Oil pipette, Kit of additional pinions
Precision of verniers:
Saddle: 0.15 mm - 15 mm/rev
Transversal carriage: 0.04 mm - 4 mm/rec
Top carriage: 0.04 mm - 4 mm/rev
Second spindle: 0.04 mm - 4 mm/rev
-type-E rapid couplig turret + 3 tool-holders 20 x 100 type D + 1 tool-holder 20 x 100 type B,
-3-jaw chuck Ø 160 mm, 4-jaw chuck Ø 200 mm,
-spindle plate Ø 250 mm, clamping set for spindle plate,
-set of 3 external jaws, set of 3 soft jaws,
-self-clamping chuck 16 mm + Chuck shank MT3,
-fine adjustment saddle stop,
-live center MT3,
-steady rest,
-following rest
- Height (cm)155.00
- Width (cm)70.00
- Length (cm)190.00
- Net weight (Kg)650.00
- Power(kW)2.2
- Power (V)3-phase 400V
- Spindle speed (rpm)70 - 2000
- Distance between centers (mm)1 000
- Center height (mm)180
- Bed width (mm)185
- Machining max. Ø (mm)350
- Spindle taperMT5
- Number of gears8
- Spindle bore (mm)38
- Headstock Morse TaperMT3
- Quill stroke (mm)100
- Longitudinal/transversal feedrates (mm/rev) 1(32) 0.078 - 1.044
- Longitudinal/transversal feedrates (mm/rev) 2(32) 0.018 - 0.236
- Transversal stroke (mm)205
- Top stroke (mm)95
- Metric-pitch thread (mm)(26) 0.48 - 10
- Inch-pitch thread (TPI)(34) 4 - 56
CONSIDER TAKING ADVANTAGE
OF SIDAMO SERVICE